[Dspforum] Lab 6 Questions

[Joseph Haber]

Alan,

Check out slide 33 in the lecture notes. What you will be using is the "Chip
Support Library," or the CSL. Remember in the second lecture when I
mentioned that in the "old days" you would get a header file that defined
all the registers, but now you operate through the CSL. This defines a whole
set of macros to set registers, fields, etc.

For example, there is the macro EDMA_RSET that allows you to directly access
the QOPT, QSRC, etc. registers.

EDMA_RSET(QOPT,0x21300001);//32bitshighpriorityTCC0

See Section 7 EDMA Module in Spru401 (which is available in the help menu
from CCS 3.1).

Joseph

On Sun, Oct 18, 2009 at 7:48 PM, Alan Ding <alan33d at gmail.com> wrote:

> Thanks Doug.
>
> I'm also having a tough time locating register definitions from the lecture
> notes:
>
> CIPR
> QOPT...etc.
>
> I found the macros in csl_edmahal.h which was not part of the example
> project.
>
> ~Alan
>
>
> On Sun, Oct 18, 2009 at 7:39 PM, Doug Wenstrand <doug at echelonembedded.com>wrote:
>
>> Yea, I forgot to time it and fill in the requirement.  Your presumption of
>> course is correct -- We want you to use QDMA to do it efficiently, but you
>> need not worry about overlapping the transfers with computations.
>> So -- the following pseudocode is what would meet the timing requirement:
>>
>> loop:
>> dma data in
>> wait for it
>> fft
>> dma data out
>>
>>
>>  On Sun, Oct 18, 2009 at 6:46 PM, Alan Ding <alan33d at gmail.com> wrote:
>>
>>> For the requirements on the back of the lab, it states that our STFT
>>> "must take less than xx ms".  What exactly is xx?  ~1.7ms*100 or ~48ms*100?
>>> I take it you guys want us to get roughly the first timing requirement using
>>> QDMA.
>>>
>>> When we first capture the data in ext ram from CCS.  The instructions
>>> wants us to create a plot of this data in CCS.  How do you do that?  Should
>>> we use the Graph function under the view tab?  What options should we use
>>> for it?
>>>
>>> Thanks,
>>>
>>> --
>>> -------------------------------------------------------
>>> Alan Ding
>>> Master of Sci, Electrical Engineering
>>> Johns Hopkins University
>>>
>>> Email: alan33d at gmail.com
>>> Contact #: 4844593290
>>>
>>> _______________________________________________
>>> Dspforum mailing list
>>> Dspforum at echelonembedded.com
>>> http://echelonembedded.com/mailman/listinfo/dspforum_echelonembedded.com
>>>
>>>
>>
>> _______________________________________________
>> Dspforum mailing list
>> Dspforum at echelonembedded.com
>> http://echelonembedded.com/mailman/listinfo/dspforum_echelonembedded.com
>>
>>
>
>
> --
> -------------------------------------------------------
> Alan Ding
> Master of Sci, Electrical Engineering
> Johns Hopkins University
>
> Email: alan33d at gmail.com
> Contact #: 4844593290
>
> _______________________________________________
> Dspforum mailing list
> Dspforum at echelonembedded.com
> http://echelonembedded.com/mailman/listinfo/dspforum_echelonembedded.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://echelonembedded.com/pipermail/dspforum_echelonembedded.com/attachments/20091018/215e6c19/attachment-0001.html>